WMPD and partners launch event to spread word on traffic safety | 9 Pin D Sub Connector

Inventor(s): Daniel Sucato (Dallas, TX), Hong Zhang (Plano, TX) Assignee(s): Globus Medical, Inc. (Audubon, PA) Law Firm: No Counsel Application No., Date, Speed: 15352622 on 11/16/2016 (860 days app to issue)

Section 4: 900 USD——Region SegmentationNorth America Country (United States, Canada)South AmericaAsia Country (China, Japan, India, Korea)Europe Country (Germany, UK, France, Italy)Other Country (Middle East, Africa, GCC)

Inventor(s): Diana Driscoll (Roanoke, TX) Assignee(s): GENETIC DISEASE INVESTIGATORS, LLC (Roanoke, TX) Law Firm: Chalker Flores, LLP (Local) Application No., Date, Speed: 15667095 on 08/02/2017 (601 days app to issue)

Factory overclocked models like the Asus and MSI cards I'm using for testing of course cost more than the base models. However, if you want something faster than a base GTX 1650, you should probably look at the GTX 1660 or AMD's RX 570/580, or even a previous generation GTX 1060. They require more power than the 1650, but any PSU with the required 6-pin connector should more than suffice.

Inventor(s): Junichi Ariyoshi (Yokkaichi, , JP), Nobuo Hironaga (Yokkaichi, , JP), Tadashi Nakamura (Yokkaichi, , JP), Takashi Inomata (Yokkaichi, , JP) Assignee(s): SANDISK TECHNOLOGIES LLC (Addison, TX) Law Firm: The Marbury Law Group PLLC (3 non-local offices) Application No., Date, Speed: 15704370 on 09/14/2017 (558 days app to issue)

Sponsored Content is made possible by our sponsor; it does not necessarily reflect the views of our editorial staff.

Inventor(s): Hideki Hada (Ann Arbor, MI) Assignee(s): Toyota Motor Engineering Manufacturing North America, Inc. (Plano, TX) Law Firm: Darrow Mustafa PC (2 non-local offices) Application No., Date, Speed: 15052647 on 02/24/2016 (1126 days app to issue)

[G06K] RECOGNITION OF DATA; PRESENTATION OF DATA; RECORD CARRIERS; HANDLING RECORD CARRIERS (printing per se B41J)

The key difference between the ATtiny10 and other AVRs is that the tiny10 doesn’t use the standard AVR ISP protocol for programming. Instead of six pins for power, ground, MISO, MOSI, SCK, and RST, this is a high-voltage programming scheme that needs 12 Volts. The normal AVR programmer can do it, but you need to build an adapter. That’s exactly what [Ben] did, using a single-sided perf board, a lot of solder, and some headers. It looks like a lot, but there’s really not much to this programmer board. There’s a transistor and an optocoupler. The only thing that could make this programmer better is an SOT-23 ZIF socket. This would allow bare tiny10s to be programmed without first soldering them to a breakout board, but ZIF sockets are expensive to begin with, and the prices on SOT-23 sockets are absurd.

Nvidia set a power target of 75 watts with the GeForce GTX 1650, so that it could work on a motherboard without the need for additional power connectors. Base clock speed is a relatively modest 1,485MHz, and the boost frequency is a restrained 1,665MHz. These figures are low compared to the GTX 1660, which has a base frequency of 1,530MHz and a boost frequency of 1,785MHz. The power limit is likely holding the clock speed back on these cards, and the highest factory overclock we observed on one of these GPUs without additional power was 1,755MHz.

To know More Details About Global Memory Connector Market Report @: https://www.globalmarketers.biz/report/manufacturing-&-construction/global-memory-connector-industry-market-research-report/2160_table_of_contents

Abstract: An assembly and method for completion of lateral wellbores is disclosed. The completion assembly includes a junction fitting with main and lateral legs, and a lateral completion string and anchoring device connected to the downhole end of the lateral leg and the uphole end of the junction fitting, respectively. A working string, positioned within the lateral leg, anchoring device, and lateral completion string, includes a setting tool that is removably connected to the anchoring device and a completion tool assembly located within the lateral completion string. The completion assembly is run by the working string into the wellbore. After setting the anchoring device, the working string conveys the completion tool assembly within the lateral completion string for gravel packing, fracturing, frac-packing, acidizing, cementing, perforating, and inflating packers, for example. After wellbore completion, the completion tool assembly is removed through the lateral leg of the junction fitting.