Las Vegas couple designs upgraded safety vest for road workers, police | Las Vegas Local Breaking News, Headlines | 9 Pin D Sub Connector

Abstract: A frac plug system for use at the end of well drill string in a fractured underground formation, including an elongated mandrel body, a nose cone, a mandrel head, and a sealing assembly; at least one sensor positioned on the nose cone, the sensor being optionally a temperature sensor, pressure sensor, pH sensor, or fluid composition sensor; a battery operated microcontroller located in the mandrel body, the microcontroller constructed and arranged to periodically read the data output of the sensor and store the data from the sensor; a transmitter constructed and arranged to transmit the stored data from the set of sensors to a receiver on a pup joint when the receiver is in receiving range of said transmitter, the receiver constructed and arranged to write the transmitted stored data to an electronic memory; and whereby the data may be retrieved from the electronic memory.

“So a regular vest requires light to hit the reflective material and that doesn’t always happen right away,” Collins said. “So if somebody’s coming around a turn, they’re not going to see that reflective material until the light hits it.”

© 1996-2019 Ziff Davis, LLC. PCMag Digital Group PC, PC Magazine and PC PCMag.com are among the federally registered trademarks of Ziff Davis, LLC and may not be used by third parties without explicit permission.

Connector shrouds are a whole conspiracy in and of themselves…. household cordless phones, 2 pin header, couple of different NiMh packs should do for them all right? Nah, go look, there’s 20 different variations of header shroud and orientation to the pos and neg. My procedure goes…. buy best value capacity/price pack that physically fits in phone, yank off shroud with header, spread or squish pins as necessary, plug in observing correct polarity… run for another year or however long it takes the fam to kill them leaving them dead down the back of the couch too long or whatever. (Theoretically I should never need to buy an AA cell again, I should reclaim the good ones from this pile of dead packs I have here…. or get round to testing and remaking packs…)

HORSESHOE PITCHERS WANTED: There are three horseshoe pitching clubs in the Treasure Valley: Nampa, Meridian and Boise. The Nampa group starts on Thursday, April 25 at 7 p.m. in Lakeview Park (across the street from the jet). The Meridian group starts today at 6 in Settlers Park.

More information about roadway laws for farm machinery is contained in the Extension Law Bulletin on this topic, available from a link in the Ag law blog post mentioned at the beginning of this article, or contact the Wayne County Extension office at 330-264-8722 if you need a hard copy.

[G07C] TIME OR ATTENDANCE REGISTERS; REGISTERING OR INDICATING THE WORKING OF MACHINES; GENERATING RANDOM NUMBERS; VOTING OR LOTTERY APPARATUS; ARRANGEMENTS, SYSTEMS OR APPARATUS FOR CHECKING NOT PROVIDED FOR ELSEWHERE (identification of persons A61B 5/117; indicating or recording apparatus for measuring in general, analogous apparatus but in which the input is not a variable to be measured, e.g. a hand operation, G01D; clocks, clock mechanisms G04B, G04C; time-interval measuring G04F; counting mechanisms per se G06M)

Press-fit pins are inserted into plated-through-holes (PTHs) on PCBs (Figure 2) and, during this process, experience the very same elastic and plastic deformation as wires in IDCs. The unique eye-of-the-needle geometry of press-fit pins and the inherent properties of the phosphor bronze material they’re generally made of provide sufficient flexibility to deform and compress during the insertion process. This flexibility sufficiently prevents any damage or scarring of the PTH, which can jeopardize the long-term reliability of the connection. Once mated, these active, high-opposing-force contact systems adjust as needed to maintain high-integrity connections in even the harshest conditions.

Abstract: A selection server device may receive a first registration request and determine that a user device is associated with a non-local call service control function (CSCF) server device and that the user device is located outside of a service area associated with the non-local CSCF server; output a non-preferred server indication to the non-local CSCF server device to cause the non-local CSCF server device to be disassociated with the user device; receive a second registration request from the user device; determine that the user device is not associated with any CSCF server; and output the second registration request to a local CSCF server device, associated with a service area in which the user device is located, to cause the local CSCF server device to register the user device with the local CSCF server device.

Inventor(s): Christopher M. Higgins (Ann Arbor, MI), Michael J. Delp (Ann Arbor, MI) Assignee(s): Toyota Motor Engineering Manufacturing North America, Inc. (Plano, TX) Law Firm: Darrow Mustafa PC (2 non-local offices) Application No., Date, Speed: 15239071 on 08/17/2016 (958 days app to issue)

Utility companies hate blackouts and electrical system damage even more than their customers do. The reason is obvious: Power may soon be restored to homes and businesses, but the utility’s service reputation often suffers for many years afterward. 

Abstract: A method and apparatus for determining failure diagnosis of drive systems of rotorcrafts through measuring the spectral characteristics of rotational oscillations and torsional oscillations and steady windup of a drive shaft. Mechanical anomalies of the drive system will alter the spectral characteristics of rotational oscillations and torsional oscillations and steady windup as detected by a pair of variable reluctance sensors in conjunction with a radial grating mounted on the drive shaft.