Get Moving: Biking moves your body and mind in a positive direction | 9 Pin D Sub Connector

Workplace health and safety groups have embraced the results and will no doubt use these for future risk management and planning activities.

Systems, methods, and devices for evaluating lead placement based on patient physiological responses Patent No. 10245434 

The LED was the thing. Her work doesn’t allow her to wear jewelry so we already knew that the ring was only temporary. I was using the controller to make the LED pulse slowly.

Abstract: Techniques are presented for testing the high-speed data path between the IO pads and the read/write buffer of a memory circuit without the use of an external test device. In an on-chip process, a data test pattern is transferred at a high data rate between the read/write register and a source for the test pattern, such as register for this purpose or the read/write buffer of another plane. The test data after the high-speed transfer is then checked against its expected, uncorrupted value, such as by transferring it back at a lower speed for comparison or by transferring the test data a second time, but at a lower rate, and comparing the high transfer rate copy with the lower transfer rate copy at the receiving end of the transfers.

A Visit from Mother Goose: May 6 from 10:30 to 11 a.m. Celebrate Children’s Book Week with Mother Goose. For ages 3 to 5.

The one you can buy today is the GTX 1650 OC Edition, which comes clocked at 1,860MHz and will retail for $179.99. The next two cards bear identical names and just slightly different model numbers. They are both called the Asus ROG Strix GeForce GTX 1650 Gaming. The one with the model number ROG-STRIX-GTX1650-A4G-GAMING is clocked slightly higher (1,710MHz) and will retail for $174.99. Due to the slight price difference and close clock speed, I would recommend instead model number ROG-STRIX-GTX1650-4G-GAMING, which is clocked just slightly lower at 1,695MHz and is priced at $169.99, which makes it the better option if you mean to overclock on your own, anyway.

[G05D] SYSTEMS FOR CONTROLLING OR REGULATING NON-ELECTRIC VARIABLES (for continuous casting of metals B22D 11/16; valves per se F16K; sensing non-electric variables, see the relevant subclasses of G01; for regulating electric or magnetic variables G05F)

What Digilent is to development boards in the US, MikroElektronika is in Europe. While Pmod aims to be capable of doing anything, Mikro-E’s mikroBUS connector wants to do everything, which is to say it has I2C, SPI, UART, two voltages, and even a few extra signals all on the same pinout. Physically, it’s two single rows of eight pins, spaced 0.9″ apart side-to-side, which means it fits into a breadboard nicely. Here’s the spec in PDF.

Tunnel field-effect transistor and method for manufacturing tunnel field-effect transistor Patent No. 10249744 

Inventor(s): Guorong Li (Beijing, , CN), Guowei Ouyang (Beijing, , CN), Hui Jin (Shenzhen, , CN), Nathan Edward Tenny (Poway, CA), Xiaoyan Duan (Shenzhen, , CN), Yunsong Yang (San Diego, CA) Assignee(s): FUTUREWEI TECHNOLOGIES, INC. (Plano, TX) Law Firm: Slater Matsil, LLP (Local + 1 other metros) Application No., Date, Speed: 15605360 on 05/25/2017 (691 days app to issue)

Abstract: A surgical probe includes a cannula assembly, having a graded index (GRIN) fiber that is configured to receive a multi-spot light beam at a proximal end and to emit the multi-spot light beam at a distal end; an adapter, having a distal end, configured to receive the cannula assembly, with the proximal end of the GRIN fiber, a proximal end, configured to couple to a light guide via a connector and to receive a light delivered by the light guide from a laser source to the adapter, and an interface, configured to couple the light delivered by the light guide to the proximal end of the GRIN fiber; wherein a length of the GRIN fiber is sufficiently long that the interface is outside a patient”s eye during a photocoagulation procedure.

For power connectors I use the screw type connectors for high power connections, and also plan on using standard 4 pin molex as found on (older) ATX supplies. I want to use +15, 5V, GND and -15V for opamp and 5V mcu projects. PIC24 and PIC32 projects can be powered from USB or the usb to serial module with 3v3, decoupled properly with some extra 10uF caps.