Asus ROG Strix Z390-E Gaming Review: Stretching The Envelope | 25 Pin Connectors

I recall one particular nightmare, Sony projection TVs. When servicing you had to unplug main assembly to work on it. Problem was they used the exact same type of connector, wired with monochrome grey wires for each lead, with no connector marking. Those who had worked on one before adopted Sharpie pen marking each connector and header. A genuine PITA otherwise.

Step 16: Perform the steps in reverse order to put the Mac mini back together! Watch our video above for a full walkthrough.

Composite laminates incorporating vertically aligned carbon nanotubes for ballistic and low velocity impact protection Patent No. 10247523 

[G01L] MEASURING FORCE, STRESS, TORQUE, WORK, MECHANICAL POWER, MECHANICAL EFFICIENCY, OR FLUID PRESSURE (weighing G01G) [4]

Inventor(s): Prashanth N. Subramanya (Karnataka, , IN), Ramakrishna Adireddy (Andhra Pradesh, , IN) Assignee(s): Texas Instruments Incorporated (Dallas, TX) Law Firm: No Counsel Application No., Date, Speed: 14755559 on 06/30/2015 (1386 days app to issue)

Abstract: A sewing apparatus includes a housing, an arm shaft that extends through the housing in a longitudinal direction, a cam member coupled to the arm shaft, the cam member including a front face and a rear face positioned opposite the front face, where the cam member includes a lobe positioned on one of the front face and the rear face, a needle assembly coupled to the housing, the needle assembly including a needle shaft and a needle coupled to the needle shaft, and an arm pivotally coupled to the housing and engaged with the cam member, where the needle assembly is slidably engaged with the arm in a vertical direction and the needle assembly is constrained with respect to the arm in the longitudinal direction and a lateral direction that is transverse to the longitudinal direction.

Currently working on a FPGA version to have both JTAG and 4 FPGA I/O lines, and an ARM version. Just laying out all three pathways onto a single pcb at the moment.

The key difference between the ATtiny10 and other AVRs is that the tiny10 doesn’t use the standard AVR ISP protocol for programming. Instead of six pins for power, ground, MISO, MOSI, SCK, and RST, this is a high-voltage programming scheme that needs 12 Volts. The normal AVR programmer can do it, but you need to build an adapter. That’s exactly what [Ben] did, using a single-sided perf board, a lot of solder, and some headers. It looks like a lot, but there’s really not much to this programmer board. There’s a transistor and an optocoupler. The only thing that could make this programmer better is an SOT-23 ZIF socket. This would allow bare tiny10s to be programmed without first soldering them to a breakout board, but ZIF sockets are expensive to begin with, and the prices on SOT-23 sockets are absurd.

[F41A] FUNCTIONAL FEATURES OR DETAILS COMMON TO BOTH SMALLARMS AND ORDNANCE, e.g. CANNONS; MOUNTINGS FOR SMALLARMS OR ORDNANCE [5]

Abstract: A brush-cleaning apparatus is disclosed for use in cleaning a semiconductor wafer after polishing. Embodiments of the brush-cleaning apparatus implemented with a multi-branch chemical dispensing unit are applied beneficially to clean semiconductor wafers, post-polish, using a hybrid cleaning method. An exemplary hybrid cleaning method employs a two-chemical sequence in which first and second chemical treatment modules are separate from one another, and are followed by a pH-neutralizingrinse that occurs in a treatment module separate from the first and second chemical treatment modules. Implementation of such hybrid methods is facilitated by the multi-branch chemical dispensing unit, which provides separate chemical lines to different chemical treatment modules, and dispenses chemical to at least four different areas of each wafer during single-wafer processing in an upright orientation. The multi-branch chemical dispensing unit provides a flexible, modular building block for constructing various equipment configurations that use multiple chemical treatments and/or pH neutralization steps.

Inventor(s): Motoyoshi Sekiya (Richardson, TX), Paparao Palacharla (Richardson, TX), Qiong Zhang (Plano, TX) Assignee(s): FUJITSU LIMITED (Kawasaki, , JP) Law Firm: Baker Botts L.L.P. (Local + 8 other metros) Application No., Date, Speed: 14882217 on 10/13/2015 (1267 days app to issue)

[H03K] PULSE TECHNIQUE (measuring pulse characteristics G01R; modulating sinusoidal oscillations with pulses H03C; transmission of digital information H04L; discriminator circuits detecting phase difference between two signals by counting or integrating cycles of oscillation H03D 3/04; automatic control, starting, synchronisation or stabilisation of generators of electronic oscillations or pulses where the type of generator is irrelevant or unspecified H03L; coding, decoding or code conversion, in general H03M) [4]