25 Gigabit Ethernet Consortium releases low-latency FEC specification for 50GbE, 100GbE, and 200GbE applications | Bicycle Reflectors

The reason why PSP (in fact, its case only) was used as a subject of this project was simply that I had a dead PSPs that I didn’t want to throw into a trash bin. As simple as that Was it wise? definitely NO but it was fun as hell, I can tell you that

Brooklyn Bicycle Co. focuses on building bikes that are designed for durability, comfort, and style. This focus is apparent in the Franklin 3. The step-through frame makes mounting your bike effortless regardless of what you're wearing, and it's made of lightweight steel so you can easily carry the approximately 33-pound bike up and down stairs. The rear hub and shifter are made by Shimano, one of the top names in the industry. And, the bike comes with puncture-resistant tires. Both the saddle and grips are made of vegan leather for maximum comfort.

Your Family History/Genealogy: Call for appointment; 267-626-4437 or email ConnieBriggs@comcast.net. Let Connie help you get started in your search.

Bicycling is a healthy alternative to commuting by car. It provides an aerobic workout that builds muscle. Though being on two wheels does carry some risks. According to the Italian National Institute of Statistics, in 2014 alone there were over 18,000 bicycle accidents in Italy. In 2015, at least 45 cyclists per day were involved in accidents. There were 525 deaths in those two years. To limit the risk of cars striking riders due to a lack of visibility, Air Force Instruction 91-207 (The U.S. Air Force Traffic Safety Program) mandates that those who plan to cycle will: Wear highly visible outer garment containing retro-reflective material during hours of darkness or reduced visibility. Riders are recommended to wear a highly visible outer garment during daylight hours. No matter how visible a rider makes themselves, they are still at risk of being involved in an accident, whether caused by themselves or another person. The cycler must be vigilant and make safety the number one priority. It’s required by AFI 91-207 to properly wear a bicycle helmet. The helmet must meet the standards set by the Consumer Product Safety Commission, American National Standards Institute, or equivalent whether stateside or overseas. “You’re only as good as your worst driver,” said Master Sgt. David Mace, an occupational safety manager from the 31st Fighter Wing Safety Office. “Personal protective equipment isn’t necessarily to protect you from yourself but also to protect you from other people.” Bicycles are required to have front-facing, pedal, side and rear-facing reflectors. The reflectors must meet the standards of 16 Code of Federal Regulation part 1512 and/or the local, state, or overseas requirements. Cyclers will use designated bike lanes when available. Not only are reflectors required but lights on the front and rear of the bicycle are mandated by law during hours of darkness. “It’s so dark out here, especially in Italy,” said Mace. “So if you’re out there and it’s nighttime, it’s super dark. I’ve actually been riding at nighttime and my batteries went dead. It was horrible.” It is also stated within the AFI that: The use of portable headphones, earphones, cellular phones, or other listening and entertainment devices (other than hearing aids) while walking, jogging, running, bicycling, skating or skateboarding on roadways is prohibited. Use of listening devices impairs recognition of emergency signals, alarms, announcements, approaching vehicles, human speech, and outside noise in general. “You may not even see [emergency vehicles] because you’re too busy rocking out,” said Mace. Italian law requires that bicycles be equipped with a bell. Also, a reflective vest is required during night riding or while riding through tunnels or lowly lit streets. Accidents can happen out of nowhere and that is why safety is paramount when riding bicycles. Proper maintenance of a bicycle and the correct protective equipment should be at the top of a safe cyclist’s checklist. When it comes to preventing accidents, readiness is a necessity.

Abstract: The present invention discloses a pesticide composition comprising a juvenoid, such as pyriproxyfen or hydroprene, and a chitin synthesis inhibitor, such as novaluron. The composition containing the combined actives provides an increased efficacy not exhibited by either active when used alone.

Abstract: A system includes a gain control circuit configured to dynamically select a gain value based on an estimated temperature for a speaker voice coil, a base gain value, and a threshold temperature value. The system also includes a power control circuit configured to determine a power limit value based on the gain value. The system also includes a filter circuit configured to adjust values of a digitized audio signal based on the power limit value. The system also includes a digital-to-analog converter (DAC) coupled to the filter circuit and configured to convert a digital output of the filter circuit to an analog audio signal.

Inventor(s): John Douglas Reed (Arlington, TX) Assignee(s): Spirent Communications, Inc. (San Jose, CA) Law Firm: Haynes Beffel Wolfeld, LLP (1 non-local offices) Application No., Date, Speed: 14801746 on 07/16/2015 (1349 days app to issue)

Inventor(s): Arthur Terry Stautzenberger (Denton, TX), Richard Paul Noffke (Frisco, TX) Assignee(s): Halliburton Energy Services, Inc. (Houston, TX) Law Firm: Haynes Boone, LLP (Local + 10 other metros) Application No., Date, Speed: 15032270 on 01/08/2014 (1903 days app to issue)

Pros: Affordable, relatively easy to assemble, attractive, comes with fenders and rear rack, lifetime limited warranty

W+P Products' 5566 and 5577 series have a low pitch of 0.5 and 1.0mm and a low design height of 1.2 and 2.0mm, respectively. These connectors also feature a locking option in the rear area. A special folding mechanism, similar to a piano cover, simplifies handling and saves space on the PCB, in contrast to a front locking mechanism. As a complement to this, W+P offers a corresponding flexible cable in its 599 series. These are available featuring pitches of 0.5mm to 2.54mm, and variable cable lengths, connection types, types, and customer-specific designs complete the portfolio. Naturally, these are also suitable for contacting flexible PCBs. The SMT ZIF connectors are equipped with double-sided contacting as a horizontal version, which increases their flexibility when used on PCBs. Available featuring 4 to 40 or 6 to 60 contacts, they are designed for currents up to 0.5 A per contact.

Ridge Pike Improvement Project Public Meeting: The Montgomery County Planning Commission will hold a public meeting on the Ridge Pike Improvement Project April 30 from 6 to 8 p.m. at the Barren Hill Fire Hall, 647 Germantown Pike, Lafayette Hill. The Ridge Pike Improvement Project, which is divided into four sections, will involve major reconstruction of Ridge Pike between Norristown and Philadelphia. This public meeting will focus only on Section C, which is in the preliminary design phase and will extend between Harmon Road in Plymouth Township and Crescent Avenue in Whitemarsh Township. There will be a short presentation at 6:20 p.m. Participants will have an opportunity to review the preliminary concept in more detail and share comments with the project team to help inform the final design going forward.

All logos and brand images are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Any trademarks cited herein are the property of their respective owners.